Farmall 230 tractor
Farmall 230 Specs
Production
| Manufacturer | Farmall (a part of International Harvester) |
| Type | Row-Crop tractor |
| Factory | Louisville, Kentucky, USA |
| Original price | $2,100 (1958 ) |
Power
| Drawbar (claimed) | 20.0 hp |
| PTO (claimed) | 24.95 hp |
| Drawbar (tested) | 25.00 hp |
| Belt (tested) | 28.06 hp |
Mechanical
| Chassis | 4x2 2WD |
| Steering | manual |
| Brakes | differential mechanical dry disc |
| Cab | Open operator station. |
| Transmissions |
|
Power Take-off (PTO)
| Rear RPM | 540 |
Serial Numbers
| Location | Right side of clutch housing |
| 1956 | 501 |
| 1957 | 815 |
| 1958 | 6827 |
| Final | 7671 |
Engine
| Engine | International Harvester 2.0L 4-cyl gasoline |
| Fuel tank | 11 gal |
Dimensions & Tires
| Weight | 3440 lbs |
| Front tire | 5.00-15 |
| Rear tire | 11.2-36 |
Belt Pulley
| Diameter | 8 inches |
| Width | 6 inches |
| RPM | 1,487 |
| Speed | 3,114 ft/min |
Farmall 230 engine specs
Engine Detail
| Engine Detail |
|
| Displacement | 122.7 ci |
| Bore/Stroke | 3.125x4.00 inches |
| Compression | 6.94:1 |
| Rated RPM | 1800 |
| Firing order | 1-3-4-2 |
| Starter volts | 6 |
| Oil capacity | 5 qts |
| Coolant capacity | 15 qts |
Farmall 230 transmission
Transmissions overview
| Transmissions overview |
|
Transmission
| Type |
|
| Gears |
|
| Transmission | The Hydra-Creeper unit consisted of a hydraulic motor that attached to the tractor's PTO shaft. The motor was powered from the tractor's hydraulics and drove the tractor through the PTO shaft. |
Farmall 230 dimensions
Tires
| Ag front | 5.00-15 |
| Ag rear | 11.2-36 |
Dimensions
| Operating weight | 3440 lbs |
| Ballasted weight | 5331 lbs |
Farmall 230 photos
