AGCO 8425 tractor
AGCO 8425 Specs
Production
Manufacturer | AGCO |
Type | Four-wheel Drive (4WD) tractor |
Factory | Coldwater, Ohio, USA |
Production | The AGCOSTAR 8425 was based on the McConnell 1000, AGCO had purchased McConnell in 1994. The 8425 was available in silver, orange, or red paint for White, Allis, and Massey customers. |
Power
Engine | 425 hp |
Drawbar (tested) | 346.61 hp |
Mechanical
Chassis | 4x4 articulated 4WD |
Steering | articulated power |
Brakes | hydraulic disc |
Cab | Cab standard with heat and air conditioning |
Transmission | 18-speed partially synchronized |
Hydraulics
Type | closed center |
Pressure | 2500 psi |
Valves | 4 or 5 |
Pump flow | 35 gpm |
SCV flow | 27 gpm |
Electrical
Ground | negative |
Charging system | alternator |
Charging amps | 130 |
Batteries | 3 |
Battery CCA | 600 |
Battery volts | 12 |
Engines
Engines |
|
Dimensions & Tires
Wheelbase | 137.1 inches |
Weight | 29485 lbs |
AGCO 8425 engine specs
Engines overview
Engines overview |
|
Engine Detail (Cummins N14)
Engine Detail |
|
Displacement | 855 ci |
Bore/Stroke | 5.50x6.00 inches |
Power | 425 hp |
Fuel system | direct injection |
Air cleaner | dual paper elements with aspirator |
Pre-heating | coolant heater |
Compression | 16.5:1 |
Rated RPM | 2100 |
Torque | 1500 lb-ft |
Torque RPM | 1400 |
Starter volts | 12 |
Engine Detail (Detroit Diesel Series 60)
Engine Detail | The Detroit Diesel engine was an option on the 8425 through 1998. Starting in 1999, only the Cummins engine was available. |
Displacement | 774 ci |
Power | 425 hp |
Fuel system | direct injection |
Pre-heating | coolant heater |
Rated RPM | 2100 |
Torque | 1500 lb-ft |
Torque RPM | 1200 |
AGCO 8425 transmission
Transmission
Transmission | Eaton Fuller |
Type | partially synchronized |
Gears | 18 forward and 2 reverse |
Clutch | 393.7mm dry disc |
AGCO 8425 dimensions
Dimensions
Wheelbase | 137.1 inches |
Operating weight | 29485 lbs |
Ballasted weight | 36118 lbs |