AGCO DT160 tractor
AGCO DT160 Specs
Production
Manufacturer | AGCO |
Type | Row-Crop tractor |
Factory | Beauvais, France |
Power
PTO (claimed) | 160 hp |
Drawbar (tested) | 142.58 hp |
PTO (tested) | 164.38 hp |
Mechanical
Chassis | 4x4 MFWD 4WD |
Steering | power |
Brakes | hydraulic wet disc |
Cab | Cab standard. |
Transmission | 18-speed full power shift |
Hydraulics
Type | closed center pressure flow compensated (PFC) |
Pressure | 2900 psi |
Valves | 4 |
Pump flow | 29 gpm |
Pump flow (Optional) | 39 gpm |
Power Take-off (PTO)
Rear PTO | independent |
Rear RPM | 540/1000 |
Attachments
Attachments | front-end loader |
Electrical
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine | Cummins 8.3L 6-cyl diesel |
Fuel tank | 120 gal |
Tractor hitch
Rear Type | 3/3N |
Rear lift (at 24"/610mm) | 16,000 lbs |
Dimensions & Tires
Wheelbase | 121 inches |
Weight | 18,500 lbs |
Serial Numbers
2002 | L001001 |
2003 | M001001 |
2004 | N001001 |
AGCO DT160 engine specs
Engine Detail
Engine Detail |
|
Displacement | 505 ci |
Bore/Stroke | 4.488x5.315 inches |
Air cleaner | two paper elements |
Compression | 17.3:1 |
Rated RPM | 2200 |
Torque | 538 lb-ft |
Torque RPM | 1251 |
Starter volts | 12 |
AGCO DT160 transmission
Transmission
Type | full power shift |
Gears | 18 forward and 6 reverse |
Clutch | electro-hydraulic wet disc |
AGCO DT160 dimensions
Dimensions
Wheelbase | 121 inches |
Length | 203 inches |
Width | 98.2 inches |
Height | 121 inches |
Shiping weight | 18,500 lbs |
AGCO DT160 attachments
AGCO FL600 Loader
Height (to pin) | 181 inches |
Clearance, dumped bucket | 152 inches |
Dump reach | 26 inches |
Dump angle | 47° |
Reach at ground | 103 inches |
Rollback angle | 38° |
Breakout force (bucket) | 6952 lbs |
Lift to full height (at pin) | 7641 lbs |
Bucket width | 96 inches |
Raise time to height | 6.1 s |
Bucket dump time | 2.7 s |
Lowering time | 4.4 s |
Rollback time | 2.2 s |