Century 2028 tractor
Century 2028 Specs
Production
Distributor | Century |
Manufacturer | Kukje |
Type | Compact Utility tractor |
Factory | Yangsu-ri, South Korea |
Power
Engine (gross) | 30 hp |
Engine (net) | 28 hp |
PTO (claimed) | 25 hp |
Mechanical
Chassis | 4x4 MFWD 4WD |
Differential lock | mechanical rear |
Steering | power |
Brakes | wet disc |
Cab | Two-post folding ROPS. |
Transmission | 12-speed partially synchronized |
Hydraulics
Type | open center |
Valves | 1 or 2 |
Pump flow | 8.9 gpm |
Total flow | 11.4 gpm |
Steering flow | 2.5 gpm |
Power Take-off (PTO)
Rear PTO | live |
Clutch | mechanical dry disc |
Rear RPM | 540 |
Attachments
Attachments | front-end loader |
Engine
Engine | Kukje 1.6L 3-cyl diesel |
Tractor hitch
Rear Type | I |
Control | position control |
Rear lift (at ends) | 2580 lbs |
Dimensions & Tires
Wheelbase | 65 inches |
Weight | 3640 lbs |
Electrical
Ground | negative |
Charging system | alternator |
Charging amps | 45 |
Battery volts | 12 |
Century 2028 engine specs
Engine Detail
Engine Detail |
|
Displacement | 95 ci |
Power (gross) | 30 hp |
Fuel system | indirect injection |
Pre-heating | glow plugs |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Century 2028 transmission
Transmission
Type | partially synchronized |
Gears | 12 forward and reverse |
Clutch | mechanical dry disc |
Oil capacity | 37 qts |
Transmission | Four gears in three ranges with left-hand shuttle. Synchronized shift (using clutch) between gears. Tractor must be stopped to shift ranges or shuttle. |
Century 2028 dimensions
Dimensions
Wheelbase | 65 inches |
Length | 120 inches |
Width | 59 inches |
Height (ROPS) | 94 inches |
Shiping weight | 3640 lbs |
Ground clearance | 11 inches |
Century 2028 attachments
Century C-30 Loader
Loader weight | 1110 lbs |
Height (to pin) | 94 inches |
Clearance, dumped bucket | 70 inches |
Dump reach | 23.5 inches |
Dump angle | 60° |
Reach at ground | 60 inches |
Rollback angle | 34° |
Breakout force (at pin) | 2480 lbs |
Breakout force (at 500mm) | 1830 lbs |
Lift to full height (at pin) | 1820 lbs |
Lift to full height (at 500mm) | 1350 lbs |
Raise time to height | 4 s |
Century C-50 Loader
Loader weight | 1320 lbs |
Height (to pin) | 103 inches |
Clearance, dumped bucket | 84.5 inches |
Dump reach | 31.5 inches |
Dump angle | 40° |
Reach at ground | 59 inches |
Rollback angle | 20° |
Breakout force (at pin) | 2430 lbs |
Breakout force (at 500mm) | 1770 lbs |
Lift to full height (at pin) | 1800 lbs |
Lift to full height (at 500mm) | 1320 lbs |
Raise time to height | 4.3 s |