Holder A12 tractor
Holder A12 Specs
Production
| Manufacturer | Holder |
Power
| Engine | 12 hp |
Mechanical
| Chassis | 4x4 articulated 4WD |
| Brakes | drum |
| Cab | Open operator station |
| Transmission | 6-speed |
Capacity
| Fuel | 2.5 gal |
| Hydraulic system | 1 gal |
Power Take-off (PTO)
| Rear PTO | independent |
| Rear RPM | 540/920 |
Belt Pulley
| Diameter | 8.25 inches |
| Width | 4.75 inches |
| RPM | 1550 |
Engine
| Engine | Sachs 0.6L 1-cyl diesel |
Hydraulics
| Type | open center |
| Capacity | 1 gal |
| Pressure | 1850 psi |
| Pump flow | 2.6 gpm |
Dimensions & Tires
| Wheelbase | 45 inches |
| Weight | 1500 lbs |
| Front tire | 5.00x16 |
| Rear tire | 5.00x16 |
Holder A12 engine specs
Engine Detail
| Engine Detail |
|
| Displacement | 36.9 ci |
| Bore/Stroke | 3.465x3.937 inches |
| Power | 12 hp |
| Fuel system | direct injection |
| Air cleaner | oil bath |
| Compression | 20:1 |
| Rated RPM | 2200 |
| Starter volts | 12 |
Holder A12 transmission
Transmission
| Gears | 6 forward and 3 reverse |
| Clutch | dry disc |
Speeds
| Speeds | With 5.00x16 tires |
| 1 | 0.8 |
| 2 | 1.3 |
| 3 | 2.2 |
| 4 | 3 |
| 5 | 4.9 |
| 6 | 8.5 |
| R1 | 0.8 |
| R2 | 2 |
| R3 | 2.2 |
Holder A12 dimensions
Tires
| Ag front | 5.50x16 |
| Ag rear | 5.50x16 |
Dimensions
| Wheelbase | 45 inches |
| Length | 80 inches |
| Width | 30 inches |
| Height (steering wheel) | 44 inches |
| Weight | 1500 lbs |
| Ground clearance | 9.5 inches |
Holder A12 photos
